|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
 ;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
;
The owners manual for the Pioneer VSX-D603S was exactly what I needed. I received it in a timely manor and it was priced fairly. I definately will use your servise again. Thank You
VCR operation
Automatic operation
Contents
To play back a tape which does not have a safety tab (this means you cannot record on to it) insert a tape. The set will at once switch itself on if the set is in standby mode and automatically perform the following sequence : PLAY ¡æ STOP ¡æ REWIND ¡æ EJECT To play back a video cassette tape which has a safety tab (this means that you have recorded on it and left the tab untouched) insert a tape. The set will switch itself on if the set is in standby mode. Then press the PLAY button to play back.
Manual operation
1. Insert a video cassette tape. 2. Press the PLAY button. The recording on the tape appears on the screen. 3. To stop playback, press the STOP button. 4. To take out the tape, press the EJECT button.
PLAY
EJECT
STOP
Tape tracking control
AUTO TRK
Tracking ensures that the tape is correctly aligned with the playback head. It works only during playback and its principle purpose is to minimize picture shake and noise (fuzzy lines across the picture). It is adjusted automatically or manually. Auto tracking Whenever playback starts, auto tracking automatically adjusts the picture. The display AUTO TRK will appear while the best picture is selected. To reactivate auto tracking, press the AUTO TRK button on the remote control handset. Manual tracking You can manually adjust the picture by pressing the TRK +/buttons.
14
|
|
|
> |
|
